DHS-DCS Plate Instruments Set
Below are list of items in DHS-DCS Plate Instruments Set. Instruments can be modified according to the customer’s requirement. All these instruments are Re-usable. These instruments are Non Sterile.
Item | Column 2 | Column 3 |
---|---|---|
1 | Instrument Case | 1 |
2 | Dual Use Drill Guide 3.2 mm | 1 |
3 | Combination Drill Guide 3.2/4.5 mm | 1 |
4 | Combination Drill Guide 4.5/6.5 mm | 1 |
5 | Small Impactor | 1 |
6 | Drill Bit 3.2 mm | 2 |
7 | Drill Bit 4.5 mm | 2 |
8 | Cortex Screw Tap 4.5 mm | 1 |
9 | Cancellous Screw Tap 6.5 mm | 1 |
10 | Pin Depth Gauge | 1 |
11 | DHS/DCS Lag Screw Tap Dia. 12 mm | 1 |
12 | Threaded Guide Pin 2.5 mm x 250 mm | 2 |
13 | Depth Gauge 90 mm | 1 |
14 | DCS Centering Sleeve – Short | 1 |
15 | DHS Centering Sleeve – Long | 1 |
16 | DHS/DCS Lag Screw Wrench – Cannulated | 1 |
17 | DHS/DCS Lag Screw Extractor – Solid | 1 |
18 | Hex Screwdriver with Screw Clamp SW3.5 | 1 |
19 | T-Handle Quick Coupling | 1 |
20 | DHS/DCS Plate Impactor | 1 |
21 | DHS Angle Ruler – 135 Degrees | 1 |
22 | DCS Angle Ruler – 95 Degrees | 1 |
23 | DHS Triple Reamer | 1 |
24 | DCS Triple Reamer | 1 |
25 | Plate & Lag Screw Tray | 1 |
26 | Screw Tray | 1 |